1000 Maxtrak
TEREX
Pegson leads the world with the high performance 1000 Maxtrak crusher
that has been designed for direct feed applications without
pre-screening on clean rock.
At its heart is the Automax cone
crusher with hydraulic setting, tramp release and unblocking system. Its
unique crushing action produces high quality aggregate and sub-base
material. Available with a choice of four liners including Autosand and
two “eccentric” throws, it will give excellent capacity, high reduction
and good product cubicity.
The Maxtrak plants are fitted with a
feed hopper that enables the Automax to be continually choke fed. This
is essential for all cone crushers to maximise the reduction and
manganese life as well as for optimal product shape. A level probe over
the feed ring regulates the feed belt to ensure the Automax is perfectly
fed.
An optional feed hopper level probe
is available for applications where the source of the feed is
intermittent and unable to keep the cone crusher continuously choke fed.
To achieve optimal performance the
crusher should be fed with well graded material from the maximum feed
size down to zero. Any fines in the feed should be clean crushed rock.
An optional short throw eccentric is
available as a special order for the 1000 Automax for tight settings and
particularly abrasive applications.
Maxtrak 1000SR
The TEREX Pegson 1000SR combines
the incredible 1000 Automax cone crusher with a double deck screen to
provide a complete crushing and screening process on a single chassis
for secondary and tertiary applications.
The 1000SR is able to produce one,
two or three stockpiles using the optional stockpiler or recirculate the
oversize for recrushing. The integrated feed hopper and level central
system ensures the Automax can be continually choke fed. The ability of
the Automax to accept an “all in” unscreened clean feed eliminates the
need for pre-screening whilst giving the optimum particle shape using
attrition crushing.
Material crushed by the Automax
transfers to a double deck screen and oversize material can be
recirculated back to the cone crusher via an onboard conveyor to produce
two stockpiles of graded aggregate.
Our patented access system simplifies
screen and conveyor maintenance by allowing the easy separation of the
crusher and screen discharge conveyor.
Optional equipment available with this
machine includes includes a 500mm wide stockpiling conveyor and choice
of concaves – Automax extra coarse, coarse, medium coarse and Autosand.
1300 Maxtrak
The
1300 Maxtrak is TEREX Pegson’s largest tracked cone crusher and is
suitable for secondary and tertiary applications up to 350 tph.
This plant “punches way above its
size” and is ideal to follow very high capacity primary jaw crushers and
produce quality sub base or aggregates.
Using the unbeatable 1300 Automax
cone crusher, the 1300 Maxtrak features a system with a large feed
hopper which is able to take an ‘all-in feed’ from the jaw crusher,
thereby improving cubicity, throughput and reduction ratios and
eliminating the need to for pre-screening on most applications.
Setting adjustment can be made ‘on
the run’ using touch button control. Dust suppression sprays and metal
detection are both included as standard. Without question, the 1300
Maxtrak is a big step ahead of the competition in its size, productivity
and operating efficiency.
A range of optional extras are available including an Autosand concave, feed hopper extension plates and an electric pump.